ROYCE Pawl Lubrication System
|Options||For 130 mm Axle - Special Order,
For 135 mm Axle - Special Order
|Description||This is a must have for Royce's latest generation rear hubs, I've never known hub servicing like this.....
To lubricate the rear pawls all a cyclist has to do is remove the rear wheel QR skewer, place the long plunger in the non-drive side hole and inject the grease into the drive side hole. When the plunger on the near side is forced a little way out of the spindle, simply put the short plunger into the drive side hole and push both plungers to meet. This forces the grease into the pawl cavity.
As with any product, specification is subject to change without prior notification. You are advised to confirm current specification before buying.